Homepage
Spanish
Chinese
METALCLAD CeramAlloy CBX

Repair and protect all types of equipment subject to very aggressive abrasion.

Engineered to repair deeply damaged components.

METALCLAD CeramAlloy® CBX is a three component, 100% solids, polymer composite specifically formulated to provide effective repair and rebuilding characteristics on all types of equipment subject to severe abrasion.

METALCLAD CeramAlloy® CBX is a paste when mixed, so it is easily applied. When cured, however, CBX becomes a metal-hard, highly abrasion resistant compound.

METALCLAD CeramAlloy® CBX is the best material to use to protect equipment subject to very aggressive abrasive environments.

Elbows, Pipes, Pumps, Chutes, Deflector Plates, Cyclones, Separators, Vibratory Feeders, Transfer Augers, etc.

  • Extraordinary Abrasion Resistance
  • Trowelable
  • Requires No Heat
  • Unlimited Shelf Life
  • 100% Solids
  • Safe & Simple To Use

Technical Data

Volume capacity per 5 kg.
110 in3 / 1790 cc
Mixed density
0.100 lbs per in3 / 2.76 gm per cc
Coverage rate per 5 kg. @ 200 mils / 5mm
3.78 ft2 / 0.35 m2
Shelf life
Indefinite
Volume Solids
100%
Mixing ratio Base Activator Aggregate
By Volume 5 2 14
By Weight 7 2 20

Working Life and Cure Times

Ambient Temperature Working Life Full Mechanical Chemical Immersion
59°F 15°C 30 min. 48 hrs. 3 days
77°F 25°C 20 min. 24 hrs. 2 days
86°F 30°C 15 min. 16 hrs. 1 day

Physical Properties

Typical Values Test Method
Compressive strength 16,000 psi 1125 kg/cm2 ASTM D-695
Flexural strength 6,000 psi 422 kg/cm2 ASTM D-790
Hardness - Shore D 86 ASTM D-2240
Tensile Strength 2,500 psi 176 kg/cm2 ASTM D-2370
Tensile Shear Adhesion (CL+AC primer to substrate)
Steel 4000 psi 280 kg/cm2 ASTM D-1002
Aluminum 2500 psi 175 kg/cm2 ASTM D-1002
Copper 3000 psi 210 kg/cm2 ASTM D-1002
Stainless Steel 4100 psi 287 kg/cm2 ASTM D-1002

Chemical Resistance

Acetic acid (0-10%) G Methyl alcohol G
Ammonium hydroxide (0-10%) EX Mineral Oil EX
Aviation fuel EX Nitric acid (0-10%) EX
Butyl alcohol EX Nitric acid (10-20%) G
Calcium chloride EX Phosphoric acid (0-10%) G
Crude oil EX Potassium chloride EX
Diesel fuel EX Propyl alcohol EX
Ethyl alcohol G Sodium chloride EX
Gasoline EX Sodium hydroxide EX
Heptane EX Sulfuric acid (0-10%) EX
Hydrochloric acid (0-10%) EX Sulfuric acid (10-20%) G
Hydrochloric acid (10-20%) G Toluene G
Kerosene EX Xylene EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Extended Information

Ask an ENECON Tech

Fill out my online form.

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.