Homepage
Spanish
Chinese
ENESEAL MP/HS

Prime, seal & smooth rough concrete surfaces in one simple step...

ENECLAD SPS is a three-component, 100% solids, concrete primer/sealer that is specifically formulated to also smooth-out rough concrete surfaces in order to improve the appearance of ENECON top-coats such as ENECLAD FPS or CHEMCLAD polymer systems. It is easy to apply using a trowel or squeegee. ENECLAD SPS is virtually odor free and has no V.O.C.’s.

ENECLAD SPS exhibits excellent adhesion to any type of concrete substrate. It also has great impact and abrasion resistance.

  • No Odor
  • 100% Solids
  • Excellent Abrasion & Impact Resistance
  • Outstanding Adhesion
  • Safe and Simple to Use

Technical Data

Volume capacity per kg.
33 in3 / 540 cc
Mixed density
0.065 lbs per in3 / 1.80 gm per cc
Coverage rate per 20 kg. @ 30 mils / 750 microns
150 ft2 / 14 m2
Shelf life
Indefinite
Volume Solids
100%
Mixing ratio Base Activator
By Volume 2 1
By Weight 2.4 1

Working Life & Cure Times

Ambient Temperature Working Life Light Load Full Mechanical
41°F 5°C 2 hrs. 3 days 7 days
59°F 15°C 40 min. 6 hrs. 36 hrs.
77°F 25°C 20 min. 4 hrs. 24 hrs.
86°F 30°C 15 min. 3 hrs. 16 hrs.

Physical Properties

Typical Values Test Method
Compressive strength 11,000 psi 770 kg/cm2 ASTM D-695
Flexural strength 4,000 psi 280 kg/cm2 ASTM D-790
Hardness - Shore D 88 ASTM D-2240
Tensile Shear Adhesion      
Steel 2,000 psi 140 kg/cm2 ASTM D-1002
Elcometer Adhesion - to properly prepared cementitious surfaces is greater than the cohesive strength of the substrate.

Chemical Resistance

Acetic acid (0-5%) G Methyl alcohol G
Acetone G Methyl ethyl ketone G
Ammonia solution (0-10%) EX Nitric acid (0-10%) G
Aviation fuel EX Palmitic acid EX
Butyl alcohol G Phosphoric acid (0-5%) EX
Calcium chloride EX Phosphoric acid (5-10%) G
Crude oil EX Potassium chloride EX
Diesel fuel EX Propyl alcohol G
Ethyl alcohol G Sodium chloride EX
Gasoline EX Sodium hydroxide EX
Heptane EX Sulfuric acid (0-50%) G
Hydrochloric acid (0-10%) EX Tannic acid EX
Hydrochloric acid (10-20%) G Toluene G
Kerosene EX Transformer oil EX
Lactic Acid (0-10%) G Xylene EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Extended Information

Ask an ENECON Tech

Fill out my online form.

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.