W  O  R  L  D  W  I  D  E        

Search the site:

Homepage > Polymer Products > Weather/Water Proofing > ENECLAD™


Cure Times
Ambient
Temperature
Working
Life
Touch
Dry
Maximum
Overcoating
Full
Cure
59°F 15°C 90 min 24 hrs 48 hrs 6 days
77°F 25°C 70 min 16 hrs 24 hrs 4 days
86°F 30°C 55 min 8 hrs 16 hrs 3 days

Adhesion to properly prepared cementitious surfaces is greater than the cohesive strength of the substrate and to steel surfaces is typically greater than 3,000 psi.

Extended ENECLAD™ Flooring Information:

ENECLAD™ Flooring Product Info

ENECLAD™ Flooring Instructions For Use - Easy step by step
ENECLAD™ Flooring News pdf Newsletter briefs
ENECLAD™ Flooring Literature Acrobat® pdf 230kb
ENECLAD™ Flooring Video (1:07 min)

All information contained herein is based on long-term testing in our laboratories as well as practical field experience and is believed to be reliable and accurate. No condition or warranty is given covering the results from use of our products in any particular case, whether the purpose is disclosed or not, and we cannot accept liability if the desired results are not obtained.

Copyright © 1999 by ENECON® Corporation. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic or mechanical including photocopying, recording, taping or information storage and retrieval systems - without written permission of ENECON® Corporation.

 1-888-4-ENECON

About ENECONPrivacyTerms of UseEnecon ChinaEnecon en Español