Homepage
Spanish
Chinese
ENECRETE® WS

Outstanding protection in some of the most aggressive chemical environments.

CHEMCLAD XC is a two component, 100% solids, ultra high performance, chemical resistant coating that provides unrivaled protection in some of the toughest chemical environments.

CHEMCLAD XC is resistant to a very broad range of organic and inorganic acids, alkalis, solvents, salts, hydrocarbons, etc. It is easily applied by brush or roller and can be used to protect all types of metal and cementitious surfaces. For your toughest chemical attack problems, use CHEMCLAD XC. The finest chemical protection polymer system available!

Prior to applying CHEMCLAD XC to concrete and / or cementitious substrates, the surface should be treated with CHEMCLAD® P4C to seal the surface, minimize outgassing and insure that optimum adhesion is obtained.

For machinery, equipment & structures.

  • Extraordinary Chemical Resistance
  • Apply by Brush or Roller
  • Unlimited Shelf Life
  • 100% Solids
  • Ultra High Performance
ABS Type Approved Product
Korean Register Approved Product

Technical Data

Volume capacity per kg.
52 in3 / 854 cc
Mixed density
0.042 lbs per in3 / 1.17 gm per cc
Coverage rate per kg. @ 10-12 mils
30 - 35 ft2 / 3 m2
Shelf life
Indefinite
Volume Solids
100%
Mixing ratio Base Activator
By Volume 1.4  1
By Weight 5 3

Colors

Dark Gray

Dark Gray

Gray

Gray

White

White

Note: Other colors are available on a “special order” basis. However, there are minimum / multiple quantity requirements for such orders and there may be an increase in cost. Additionally, due to formulation restrictions, not all colors are possible for all materials. Speak to your local ENECON Sales Representative for more information.

Due to monitor / printer differences, actual colors may vary slightly from the representations appearing in this chart.

Working Life and Cure Times

Ambient Temperature Working Life Touch Dry Maximum Overcoating Full Cure
59°F 15°C 40 min. 24 hrs. 48 hrs. 6 days
77°F 25°C 30 min. 16 hrs. 24 hrs. 4 days
86°F 30°C 25 min. 8 hrs. 16 hrs. 3 days

Physical Properties

Typical Values Test Method
Tensile Shear Adhesion    
Steel 2900 psi 203 kg/cm2 ASTM D-1002
Aluminum 2400 psi 168 kg/cm2 ASTM D-1002
Copper 2500 psi 175 kg/cm2 ASTM D-1002
Stainless Steel 2700 psi 189 kg/cm2 ASTM D-1002
Elcometer Adhesion - to properly prepared cementitious surfaces is greater than the cohesive strength of the substrate.

Chemical Resistance

Acetic acid (0-10%) EX Methyl alcohol G
Acetic acid (10-20%) G Methyl ethyl ketone G
Acetone G Naptha EX
Aviation fuel (JP-4) EX Nitric acid (10-20%) EX
Brake Fluid EX Phenol G
Butyl alcohol EX Phosphoric acid (0-50%) EX
Calcium chloride EX Potassium chloride EX
Carbon tetrachloride G Propyl alcohol EX
Chloroform G Skydrol EX
Crude oil EX Sodium chloride EX
Diesel oil EX Sodium hydroxide EX
Ethyl alcohol EX Sulfuric acid (0-20%) EX
Gasoline EX Sulfuric acid (50%) EX
Heptane EX Sulfuric acid (98%) EX
Hydrochloric acid (0-20%) EX Toluene EX
Kerosene EX Xylene EX

EX - Suitable for most applications including immersion
G - Suitable for intermittent contact, splashes, etc.

Extended Information

Ask an ENECON Tech

Fill out my online form.

Sign up for ENECON's latest Repair - Don't Replace solution

Fill out my online form.

Case Studies