Homepage
Spanish
Chinese

Slip-Resistant Safety Surfacing

Slipping Hazard SignSAFETYCLAD DuraGrip Systems is designed to provide some of the finest slip-resistant surfaces for the most demanding applications.

Accidents occur when people catch an edge of a shoe or place the foot on a wet or slippery surface. Falls in the workplace can injure workers, while shoppers are at risk in malls and shopping centers. Children are especially vulnerable and must be protected from falls on stairs and slick surfaces. Hospitals, nursing homes and schools are especially concerned about slip and fall accidents.

Whether on metal, concrete, tile, marble, slate or terrazzo, our DuraGrip systems can be tailor-made to provide the specific level of slip resistance required – from very fine to very coarse.

Our DuraGrip Systems utilize the finest polymer composite materials available from ENECON to bond a variety of hard wearing aggregates to suit your specific requirements. You can create just about any pattern or shape that the situation demands.

So whether it’s steps, walkways, tank tops, ramps, shower areas, or entire floor areas, SAFETYCLAD DuraGrip systems can provide the best slip-resistant surface possible.

An ENECON DuraGrip System is comprised of a liquid polymer composite combined with a durable, long-lasting, wear-resistant aluminum oxide (Al2O3) aggregate to create a safe, slip resistant surface for pedestrian and vehicular traffic.

The DuraGrip Systems are supplied in our standard 5-gallon bucket and are comprised of 3 units of the desired polymer (including 3 each spatulas, applicators and stiff-bristled brushes) and 12 kilograms of one of 3 different aggregates, a #24 Al2O3 or a #36 Al2O3 or a white #36 Al2O3, enabling a custom-made system for a specific service condition.

The DuraGrip Systems are as follows:

  • SuperBond DuraGrip - For systems that bond to virtually any surface.
    Consisting of: 3 x 1 kg units of SuperBond, 12 kgs of the desired Al2O3 aggregate, 3 brushes, 3 mixing knives, 3 applicators.
  • CHEMCLAD XC DuraGrip - For systems in the harshest chemical environments.
    Consisting of: 3 x 750 gm units of CHEMCLAD XC, 12 kgs of the desired Al2O3 aggregate, 3 brushes, 3 mixing knives, 3 applicators.
  • CHEMCLAD GP DuraGrip - For systems common in industrial and commercial chemical environments.
    Consisting of: 3 x 750 gm units of CHEMCLAD GP, 12 kgs of the desired Al2O3 aggregate, 3 brushes, 3 mixing knives, 3 applicators.
  • CHEMCLAD GP Safety Yellow DuraGrip - For curbs and visible caution areas.
    Consisting of: 3 x 750 gm units of CHEMCLAD GP, 12 kgs of the desired Al2O3 aggregate, 3 brushes, 3 mixing knives, 3 applicators.
  • CeramAlloy CL+AC DuraGrip - Quick curing and best adhesion to metal surfaces.
    Consisting of: 3 x 1 kg units of CeramAlloy CL+AC (Gray), 12 kgs of the desired Al2O3 aggregate, 3 brushes, 3 mixing knives, 3 applicators.

Stairs - Before

Stairs - Before

Stairs - After

Stairs - After

Ladder

Ladder

Ladder

Ladder - After

Concrete Stairs - Before

Concrete Stairs - Before

Concrete Stairs - After

Concrete Stairs - After

Train Door Flooring

Subway platform - Original application

Train Door Flooring

Subway platform after 8 years in service application

Bus Steps - Before

Bus Steps - Before

Bus Steps - After

Bus Steps - After

Loading Dock - Before

Boat Bow - Before

Loading Dock - After

Boat Bow - After

Train Engine

Train Engine Walkway

Loading Dock Entrace - Before

Loading Dock Entrance - Before

Loading Dock Entrance - After

Loading Dock Entrance - After


Ask an ENECON Tech

Fill out my online form.