Battery Charging Area Protection Solutions

It’s hard to imagine a manufacturing facility or warehouse location that does not need/use towmotors, forklifts etc. to move materials around.

Many of these indoor machines are powered by lead-acid batteries which must be recharged after each shift (at least!)

Each facility has a recharging room for this purpose.

These areas require a floor coating resistant to the strong chemicals used in the batteries. Unprotected concrete floors quickly degrade due to spilled chemicals eating into the concrete.

The ENECON Solution:

• ENECRETE DuraQuartz™. to quickly repair damaged concrete without the long wait for standard concrete to dry and cure. For a simple repair the area can be back in service in just a few hours.
• CHEMCLAD SC™ or CHEMCLAD XC™ - depending on the type and strength of the chemical resistance needed. Easily applied by roller or brush. No odors, no VOC’s

Here is one example:

Existing failed coating removed and surface prep by shot-blasting

Holes and degraded concrete repaired with DuraQuartz™

Applying the 2nd coat of CHEMCLAD XC™

Competed during an overnight shift plus one day shift, to minimize facility disruption.